This was one of those chassis' with little to no documentation except for 3 different sets of schematics that didn't agree with other. Several people have asked about a kit for this chassis & have supplied me with cap lists. These lists all had discrepancies among them, as well. A recent list supplied by Gene Zouzalik was closest to two of the schematics & one of the previously supplied list. Presumedly, the variations in values come from previous tech replacements during servicing. I cross referenced all lists & came up with a rough cap kit of all those verifiable by the schematics. There are 4 inconsequential caps listed differently, or omitted from lists, that are not verifiable via any schematic, but there are 3 caps on the schematics not listed on anyones supplied list, making for a kit of 22 total electrolytics encompassing all common failures among monitors. Because of this, there may be caps/positions in the kit that are not physically on your particular chassis. As with all kits, if you find a position, but it has never had a cap in that position previously, do not install one... your chassis does not require it. In the same respect, if you find an electrolytic that does not have a replacement in the kit, chances are that it is an inconsequential cap that should outlive us all with no outside interference from Mother Nature or an experimenter. Additional field note: C513 on neck bd not used on some versions.
|